Type
Powered Bluetooth aptX HD speaker system
Amplifier Type
Class AB
Power Output
60 W peak power total (15 W RMS / 30 W peak per channel), AES
Drivers 2.75” aramid fiber woofers 0.75“ Silk dome tweeters
Inputs 3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth
Outputs RCA variable line-out, 3.5 mm mini-jack headphone out
Input Voltages 110-240 V 50/60 Hz auto-switching
SNR >95 dB (typical A-weighted)
THD+N <0.05% at all power settings
Crosstalk <50 dB
Frequency Response 65 Hz-22 kHz ±2.0 dB
Frequency Response w/ Bass Reduction Switch selected 100Hz-22kHz ±2.0dB (<5dB down)
Input Impedence 5K ohms unbalanced
Protection Output current limiting, thermal over-temperature, power on/off transient protection
Power Consumption Idle: 10W
Input Bit Depth 24 bit (padded)
Bluetooth Receiver Type Bluetooth 5.0
Supported Codecs aptX HD, aptX, AAC, SBC
Wireless Operation Range Up to 100 ft (30 m) typical
Input Data Rate Determined by Bluetooth
Wireless Latency ~30 milliseconds (ms)
Connector Type Micro-USB
USB Device Class USB 1.1 or above
Input Bit Depth 24 bit (padded)
Input Sample Rate 44.1 kHz/48 kHz
Headphone Amp Type OPA2134
Full-scale Headphone Output Level 2.0 V RMS
Output Impedence 2 ohms
Recommended Headphone Impedence Level 10 ohms to 10K ohms
Dimensions (HWD) Each speaker – 7″(17.8 cm) x 4.25″ (10.8 cm) x 5.5″ (14 cm)
Weight Left (powered) – 4 lb (1.8 kg) Right (passive) – 3.4 lb (1.5 kg)
Total Shipping Weight 10 lb (4.6 kg)
Shipping Box Dimensions (LWH) 11.75″ (30 cm) x 8.8″ (22.5 cm) x 11.6″ (29.5 cm)
