Audioengine A5+ Wireless Speaker System (Black)

The A5+ premium powered speakers are a complete home music system with bold stereo sound that fills any room. Connect in seconds and stream your music from any app or device via high-definition Bluetooth.

GENERAL SPECIFICATIONS

Power Output

• 150W peak power total (50W RMS / 75W peak per channel), AES

Inputs

• 3.5mm stereo mini-jack, RCA L/R

Input Voltages

• 115/240V, 50/60Hz manually switchable

Amplifier Type

• Dual Class AB monolithic

Drivers

• 5″ aramid fiber woofers, 3/4″ silk dome tweeters

SNR

• >95dB (typical A-weighted)

THD+N

• <0.05% at all power settings

Crosstalk

• -50dB

Frequency response

• 50Hz-22kHz +/-1.5dB

Input impedance

• 10K ohms unbalanced

Protection

• Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fuse

Power Consumption

• Idle: 10W
• Mute: 6W
• Sleep: 4W

BLUETOOTH SPECIFICATIONS

Internal D/A converter

• AKM AK4396

Input bit depth

• 24-bits upsampled

Bluetooth receiver type

• Bluetooth 5.0 audio

Supported codecs

• aptX HD, aptX, AAC, SBC

Wireless operation range

• Up to 100ft (30m) typical

Input data rate

• Determined by Bluetooth

Wireless latency

• ~30 milliseconds (ms)

WEIGHTS AND MEASURES

Dimensions (each speaker HWD)

• Left – 10.75″ (27cm) x 7″ (18cm) x 9″ (23cm)
• Right – 10.75″ (27cm) x 7″ (18cm) x 7.75″ (20cm)

Weight (LEFT speaker)

• 15.4 lbs (7 kg)

Weight (RIGHT speaker)

• 9.6 lbs (4.4 kg)

Shipping weight

• 31 lbs (14 kg)

Shipping box dims

• 15″ (38cm) x 22″ (56cm) x 11.5″ (29cm)

FINISH OPTIONS

• Satin Black Paint
• Hi-Gloss White Paint
• Solid Carbonized Bamboo

ENVIRONMENTAL REQUIREMENTS

• Operating temperature: 32 degrees F to 95 degrees F
• Non-operating temperature: -4 degrees F to 113 degrees F
• Relative humidity: 5% to 95% non-condensing

MATERIALS AND CONSTRUCTION

• 1/2″ (13mm) thick MDF cabinets
• 5″ (130mm) aramid fiber woofers with advanced voice coils
• 3/4″ (20mm) silk dome tweeters with neodymium magnets
• Toroidal power transformer

DRIVERS

• Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means that the woofer retains its shape when being driven at high levels. The speaker materials and construction are robust enough to stand up to some serious thrashing, so speaker grills are not needed and they will sound and look great after many years of use.
 

POWER AMPLIFIERS

• The amplifiers in Audioengine speakers are located in the left speaker and are a conservatively rated analog design. All components are tuned together for each model, which provides a much more efficient system requiring less power than passive speakers and separate amplifiers. Circuit boards for the power and preamp sections are mounted for maximum mechanical shock protection.

POWER TRANSFORMERS

• Power transformers are a large contributor to the overall audio performance, especially in the low end. Again, no off-the-shelf parts. Audioengine uses gapless core toroidal transformers which have a tighter radiated magnetic field, directly translating to lower noise. They are lighter than standard, lower-cost transformers and also generate less heat.
 

SHIELDING

• Both drivers are directly video shielded and allow the user to place the speakers within a few inches of a video monitor. This shielding also offers protection for hard-drive digital music players.

• 1 x Remote control
• 1 x Antenna
• 1 x Speaker wire (16AWG), 4 meters (~13ft)
• 1 x Detachable AC power cord
• 1 x Mini-jack audio cable, 2 meters (~6.5ft)
• 1 x RCA audio cable, 2 meters (~6.5ft)
• 2 x Microfiber speaker bags
• 1 x Microfiber cable bag
• 1 x Quickstart guide
• 1 x Product line brochure